Page 11 - TURNING CATALOG p121-254
P. 11
3 USER GUIDE ISOTURN INSERTS
0.4 11˚
NR Chipformer
3° 17°
0.2 Double-sided sharp cutting edge with a 13º positive rake angle
for machining high temperature alloys at ap < 6 mm.
10° 19°
0.3 R3M Chipformer
2.9 3.7 Double-sided insert for rough machining on stainless steel with a unique deflector
8.5˚ geometry to improve chip control. Includes a wavy surface to prevent chip hammering.
1.55 T3P Chipformer
0.28
Double-sided 6˚ negative flank trigone insert for high feed turning on steel.
13º 21º
TNM Chipformer
0.3 8˚
Double-sided trigon for roughing applications. Feed ranges:
0.3 13˚ from 0.25 to 0.65 mm/rev. Depth of cut from 2 to 7 mm.
0.25 EM-R Chipformer
20°
Double-sided sharp cutting edge with a 13º positive rake angle
0.3 for machining high temperature alloys at ap < 6 mm.
15°
HT/WG Chipformer
0.3
20° Double-sided for roughing applications. Feed range: 0.25 mm/rev to 0.8 mm/rev.
Depth of cut from 2.00 to 10.0 mm.
HM Chipformer
Feed range: 0.08 mm/rev to 0.75 mm/rev. Depth of cut from 1.5 mm to 8.0 mm.
H3P Chipformer
• For heavy roughing applications
• Low cutting force for low horse power machines
• Excellent chip control due to changeable land and a flexible chip breaker
H4P Chipformer
• For heavy roughing applications
• For large depth of cut and high feed
• Strong cutting edge credit to a wide land and large land angle
H5P Chipformer
• For heavy roughing applications
• For large depth of cut and high feed
• Extremely strong cutting edge credit to a wide land and large land angle
• Suitable for high cutting conditions
131