최대 15 mm의 홈깊이까지 가공할 수 있는 새로운 MIFR 15 ... 인서트 및 공구를 소개합니다.
신제품 MIFR 15.. 인서트는 MIFHR...-15 홀더에 스크류 클램핑 방식으로 견고하게 체결되어, 더 높은 절삭 조건 적용 및 향상된 공구 수명을 제공합니다.
공구의 장점
가공부에 직접 급유 가능한 내부 급유 방식적용
자연스러운 칩 배출이 가능한 인서트 경사면
회전용 공구로도 사용 가능
The new
MIFR 15..
inserts are available in .098, .118 and .138” widths. Full radius .100 and .118” (2.5 and 3.0 mm) inserts made from IC908 grade are also available.
Special widths within this range can be ordered on request.
Chipbreaking Comparison Test
MIFR 15-3.00-0.20 vs. PICCO R 016.0300-10 on AISI 4140
Vc= 260 SFM
Doc= .197”
Chipbreaking Comparison Test
MIFR 15-3.00-0.20 vs. PICCO R 016.0300-10 on AISI 316L
Vc= 200 SFM
Doc= .197”
MIFR
Screw-Clamped Inserts for Internal Face Grooving and
Turning, Penetration Diameter Range .315-.669"
Recommended cutting speeds and feeds can increased by 20-30% for aluminum, and reduced by 20-30% for titanium and Inconel
MIFHR
Bars for Face and Internal Grooving,
Undercutting and Threading Inserts
(1) Only face grooving inserts are available for this tool