Page 14 - MILLING CATALOG p095-186

ENDMILLS • SOLID CARBIDE • MULTI-MASTER SELECTION GUIDE

TROCHOIDAL / DYNAMIC MILLING S (High Heat Resistant Alloys)

Designation Ø LU (Neck) ap ZEFF Corner Type Coolant Page
EC-E7/H7-CF - NO 119-120
2-20 - 2xDC, 4xDC 7

EC-H-CF 6-20 - 2xDC 6-20 CHWx45 NO 123

HIGH FEED MILLING

Designation Ø LU (Neck) ap ZEFF Corner Type Coolant Page
EFP-E4,5CF 6-20 - 2.5xDC 4/5 RE NO 132

EFF-S 1-20 3xDC MIN. 2/4 RE NO 132

CHAMFERING AND DEBURRING Ø LU (Neck) ap ZEFF Corner Type Coolant Page
NO 174
Designation 4-12 - 2.5xDC 4 -

ECF.../45

ECD-S2 3-12 2xDC 0.5xDC 2 - NO 174

*ROUGH: AE = 40% - Full Cut , ap = 1.5 x DC

Material Group Parameters Nickel based Alloys Titanium and Ti Alloys

Vc (IC900/608) (m/min) 31-35 36-37
Vc (IC300) (m/min)
Fz (Ø6–8) (mm/t) 20-40 30-50
Fz (Ø 10-12) (mm/t)
Fz (Ø 16-20) (mm/t) 20-30 20-40 ap
AE
Material Group Parameters 0.02-0.03 0.02-0.03
ap
Vc (IC900/608) (m/min) 0.03-0.04 0.03-0.04 AE
Vc (IC300) (m/min)
Fz (Ø6–8) (mm/t) 0.03-0.07 0.03-0.07 ap
Fz (Ø 10-12) (mm/t) AE
Fz (Ø 16-20) (mm/t) SEMI-FINISH: AE = 10% - 40%, ap = 2 x DC

Material Group Parameters Nickel based Alloys Titanium and Ti Alloys

Vc (IC900/608) (m/min) 31-35 36-37
Vc (IC300) (m/min)
40-50 50-60
Vc (IC902/903/702) (m/min)
Fz (Ø6–8) (mm/t) 30-45 40-50

Fz (Ø 10-12) (mm/t) 0.03-0.04 0.03-0.04
Fz (Ø 16-20) (mm/t)
0.035-0.05 0.035-0.05

0.05-0.08 0.05-0.08

FINISH / H.S.M: AE = 5% - 10%, ap = Max. cutting length

Nickel based Alloys Titanium and Ti Alloys

31-35 36-37

50-70 60-70

45-60 50-60

55-80 65-80

0.035-0.05 0.035-0.05

0.04-0.06 0.04-0.06

0.06-0.085 0.06-0.085

106 ISCAR