Page 19 - New Products 2021
P. 19
OAH OAW A-A A-A
LF HTPRM
TGTBY-JHP OAL CUTDIA Bar Max
Y-Axis Intermediate Prismatic
Holders for Square JHP HF LB
Adapters on Multi-Task Machines
for Parting and Grooving
TGTBY R32-D82R-JHP with TGAQ Shown
Designation OAH HF OAW LF LB CUTDIA OAL(1) OAL_2(2) HTPRM
150.00 62.00 82.0 153.00 156.40 32.00
TGTBY L32-D82R-JHP 42.0 65.8 16.00 150.00 62.00 82.0 153.00 156.40 32.00
150.00 62.00 82.0 153.00 156.40 32.00
TGTBY R32-D82L-JHP 42.0 65.8 16.00 150.00 62.00 82.0 153.00 156.40 32.00
TGTBY R32-D82R-JHP 42.0 65.8 16.00
TGTBY L32-D82L-JHP 42.0 65.8 16.00
• Can be used also for X-axis (multi-task machines) - location pin should be removed
(1) Overall length with TGAQ adapter
(2) Overall length with DGAQ adapter
Y-Axis Tool Setup on Multi-Task Machines
Parting and Setup in Y Axis Direction Parting and Setup in X Axis Direction - Optional
Cutting edge is located: TGTBY Cutting edge is located 27.5mm TGTBY
1. 30.82mm from machine center from machine center line ( )
line ( ) in Y Axis *27.5 REF
2. 3mm from for TGAQ adapter and
6.4mm for DGAQ adapter
(see sketches below)
*30.82 REF
X Feed (in X axis)
Feed (in Y axis)
*3 REF
Y
Machine Probe
n
X Option 1Option 2 Y Y
n
For TGAQ For DGAQ Correct
Adapters Adapters Position Correct
X Position
3 REF 6.4 REF
Setup cutting edge level on center line Setup cutting edge level on center line
* For Y Axis cut off, compensate 30.82mm in Y Axis direction * For X Axis cut off, compensate 27.5mm in Y Axis direction.
and compensate 3mm for TGAQ adapters or Location pin should be removed
6.4mm for DGAQ adapters in X Axis direction.
Set the cutting edge on the center line:
Option 1 - Gauge the cutting edge - this is preferable due to
better accuracy
Option 2 - Gauge the blade and compensate 3mm / 6.4mm
Spare Parts 1 1. Block: TGTBY
8 2. Locating pin: Side thrust Pin 3mm
Designation OR 16X2 NBR
TGTBY-JHP SR ISO 14580 M4X10 SR M4X9-SEAL-JHP 3. Clamping screw : SR M4x10 ISO 14580
JHP COPPER S4EA.LC1/l8a"mpBiLnDgT2&0/Ss7ealinSgW6s-ScDrewP:LGSGR1/M8 T4Lx3690-SeaHlW-J5H.0P SIDE THRUST PIN 3mm
3
5. Seal washer: CSW 1/8’’
2 6. O-ring: O-ring 10x2 NBR
Remove Pin for 7. Lower sealing plug : Plug G1/8-6.5 TL360
X-Axis Machinning 8. Upper sealing screw : SR M3x4-DIN913
6 17
4
53 7